Solar Planning Guide

Solar Zone Map & Planner

Find your deployment location's solar zone, see peak sun hours, and understand what a BlueBox 200W solar panel delivers through the darkest month of the year.

Peak Sun Hours by State

Select a state to see its solar zone, peak sun hours, and estimated 200W panel output.

Zone 1 6.0+ h/day
Zone 2 5.5–6.0 h/day
Zone 3 5.0–5.5 h/day
Zone 4 4.5–5.0 h/day
Zone 5+ Under 4.5 h/day
WAORCAIDNVAZMTWYUTCONMNDSDNEKSOKTXMNIAMOARLAWIILINMIOHKYTNMSALGAFLSCNCVAWVPANYME

Zone boundaries cross state lines. Many states span two zones — the dominant zone is shown.

Select a state on the map

or use the table below

Solar zone data adapted from SharpVue's published solar sizing table. Source: SharpVue Solar Zone Guide

BlueBox 200W Panel — Estimated Output by Zone

Average watts delivered around the clock. The worst-month figure determines whether your system stays operational through winter.

Zone 16.0+ h/day
Worst month: ~27W
Typical year
~47W
Worst month
~27W
Zone 25.5–6.0 h/day
Worst month: ~25W
Typical year
~43W
Worst month
~25W
Zone 35.0–5.5 h/day
Worst month: ~19W
Typical year
~39W
Worst month
~19W
Zone 44.5–5.0 h/day
Worst month: ~13W
Typical year
~35W
Worst month
~13W
Zone 5+Under 4.5 h/day
Worst month: ~7W
Typical year
~31W
Worst month
~7W

Estimates based on SharpVue's published solar sizing table, scaled to a 200W panel with standard system losses applied. Actual output varies with panel orientation, shading, temperature, and site conditions. These figures are for planning reference only — not a performance guarantee.

Solar Deployment Considerations

What is a peak sun hour?

A panel's wattage is what it produces under full sun — 1,000 W/m². No site achieves that all day. A peak sun hour adds up the day's actual light and expresses it as full-sun hours: five peak sun hours means the day's total sunlight was worth five hours of full sun. Multiply panel watts × peak sun hours × efficiency losses to get the day's harvest.

Why plan on the worst month?

A battery stores days of energy, not months. July's surplus does nothing for January. If the array can't keep up with the load in the darkest month, the bank drains a little every day until the system stops — however good the summer was. Always size for December, not the annual average.

Panel orientation matters

Face panels south within 45° either way. East or west orientation takes roughly four times longer to recharge in winter. North-facing panels may never recover in Zone 4 and 5. Walk the site in December — the low winter sun angle means anything on the south side that's harmless in June can shade the panels all afternoon.

Shading and site conditions

Snow, dust, and pollen left on panels can zero a day's harvest. Add a wipe-down to the site walk after a storm. In the Southwest, airflow around the enclosure protects panel output and battery life. In cold climates, lithium batteries will not charge below freezing unless heated — go into a cold snap with the bank full.

Count every watt, 24 hours a day

Cameras, cellular modems, routers, and any satellite uplink draw power continuously. A Starlink Mini alone is ~32.5W. Every device on the system draws from the battery around the clock — not just when actively recording. Build your power budget from the full 24-hour load, not peak usage.

Zone 4 and 5 winter plans

In Zone 4 and 5, solar alone is insufficient through the darkest months. Options include a scheduled plug-in recharge every 6–10 days, a generator feeding the battery bank, or selecting an AC-powered unit where a grid connection is available. Contact TechnologyOne to discuss the right configuration for your site.

Frequently Asked Questions

Ready to plan your deployment?

Our team can assess your specific site, load requirements, and zone to recommend the right BlueBox solar configuration.